YOKE Weld-on Ring 8-082
• Pivots 180°, designed minimizes head room.
• Manufactured from forged alloy steel, quenched and tempered.
• Tested and certified by DGUV GS-OA-15-04.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts are traceable to Test Certification.
• Proof tested to 2.5 times the WLL.
• The two points of attachment facilitate an even and optimal force distribution into the work
piece and thus, usage of thinner base plates is possible.
• The welding block is forged out of material with excellent welding properties.
• Low profile design with high strength.
• The ring is stowable thus avoiding the hazards of tripping and snagging.
Item No.
Working
Load Limit Dimensions (mm) N.W.
tonnes A B C D E F L M HV a kg
8-082-04 4.0 66 14 30 48 65 70 135 76 5 3 0.6
8-082-06 6.7 85 20 39 60 89 91 171 98 5 3 1.5
8-082-10 10.0 95 21 46 65 100 100 196 106 7 4 2.4
8-082-16 16.0 127 30 57 90 130 136 263 149 8 4 5.5
8-082-30 31.5 178 42 75 130 160 195 375 213 15 4 15.8
YOKE Lashing Weld-on Point
• Lashing ring pivots 180°
• Full Lashing Capacity in all directions.
• Manufactured from forged alloy steel, quenched and tempered.
• Tested in accordance with EN1677-1.
• 100% magnaflux crack detected.
• Parts individually forged with batch code to ensure full traceability.
• The permitted lashing capacity "LC" in daN forged onto each product for quick and easy identification.
• Lugs designed to assist the welding process.
• A protected spring keeps the lashing ring in the required position. The parts are connected in
such a way that they remain captive. The spring
also reduces noise caused by vibrations.
Item No.
Lashing
Capacity Dimensions (mm) N.W.
daN A B C D E F G H L W HV a b kg
8-0576-030 3000 64 31 38 13 13 63 24 39 84 32 5 3 3 0.32
8-0576-050 5000 74 39 45 16 15 75 28 47 98 39 8 3 3 0.49
8-0576-080 8000 84 40 51 16 17 81 29 52 108 45 9 3 3 0.67
8-0576-134 13400 110 60 67 23 22 115 43 72 152 59 12 4 4 1.71
8-0576-200 20000 122 70 67 27 22 122 51 71 164 59 17 5 7 2.45
8-0576-320 32000 180 92 100 26 32 172 66 106 228 89 25 6 8 6.33
YOKE Weld-on Point
Designed with spring, stop at any angle Metric (8-057)
• Pivots through 180°.
• Manufactured from forged alloy steel, quenched and tempered.
• Manufactured and tested in accordance with EN1677-1.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts are traceable to Test Certification.
• Proof tested to 2.5 times the WLL.
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
• WLL forged onto each product for quick and easy identification.
• Lugs designed to assist the welding process.
• A protected spring keeps the load ring in a required position. The parts are connected in
such a way that they remain captive. The spring
also reduces noise caused by vibrations.
• Never apply load except in the same direction
with the pivot direction.
Item No.
Working
Load Limit Dimensions (mm) N.W.
tonnes A B C D E F G H L W HV a kg
8-057-1T 1.0 83 41 48 14 14 86 27 58 109 50 5 3 0.5
8-057-3T 3.0 98 48 58 17 17 85 31 54 114 58 6 3 0.9
8-057-5T 5.0 120 63 66 22 22 118 41 77 157 64 7 3 1.3
8-057-8T 8.0 121 73 68 26 26 122 53 69 169 60 10 4 2.6
8-057-10T 10.0 146 73 82 20 30 141 53 88 191 75 10 4 2.8
